Replaces to John Crane Type 6 | Pac-Seal Type 16 | Sealol Type 60L I US SEAL AV
Our design advantages:
Ideal for: Pool Pumps, Spa Pumps, Stamped Pumps, Smaller industrial and Commercial Applications.
Crimped Head
- Greatly simplifies installation
- No adhesive on seal face
- Prevents penetration of solids into the seal head
- Cushions rotary seal face
- No metal to seal face contact
Unitized Design
- No-hassle handling
- Easy to install
- Rotating face will not detach
- No removable drive gasket
Hex Drive
- Will not disengage during operation
- Protects the elastomer bellows from damage
Economical Choice
- High volume, standardized components
Single Coil Spring
- Helps prevent clogging
For use with a variety of mating rings
- O-Ring Mount
- Cup Mount
- DIN
Non-Fretting design
TS 166
Operating Limits:
Pressure: ≤1.0MPa
Speed: ≤10m/s
Temperature: -30ºC~+200ºC
Rotary Ring (Carbon/SiC/TC)
Stationary Ring (Ceramics/SiC/TC)
Secondary SeaI (/NBR/VITON/Encapsulated Ring)
Metal Parts (SUS304/SUS316)
Medium: Clean liquid, Sea water, waste water.
Design Features:
a. Single face, balanced.
b. Confirm to the DIN24960 and GB6556 standards.
The following is a few of the specialty pumps that we
have manufactured replacement seals for:
1. Roto Jet
2. Gorman Rupp
3. Viking
4. Seepex
5. Flygt
6. Johnson Albin
7. Bird Screens
8. Mission
9. Moyno
10. ACD Cryogenic
11. EMU
We would be happy to work with you on any of your unusual seal requirements
TS 166T
Trisun is a professional manufacturer of mechanical seals and OEM pump seals since 1998 and has branches in USA and Australia! Our seals are interchangeable with John Crane, Burgmann, AES, Flowserve, Fluiten, Roten, Sealtek etc.
TRISUN design advantages:
Competitors' inferior design and bad points:
- Offer less engagement
- Sharp stampings can damage the seal bellows
- Can be installed upside down at the seal manufacturer
- Competitor's tang and notch designs:
- Offer loose engagement
- Fewer points of contact with the seal outer shell
- May lead to broken tangs and seal bellows damage
Our design advantages:
Ideal for: Pool Pumps, Spa Pumps, Stamped Pumps, Smaller industrial and Commercial Applications.
Crimped Head
- Greatly simplifies installation
- No adhesive on seal face
- Prevents penetration of solids into the seal head
- Cushions rotary seal face
- No metal to seal face contact
Unitized Design
- No-hassle handling
- Easy to install
- Rotating face will not detach
- No removable drive gasket
Hex Drive
- Will not disengage during operation
- Protects the elastomer bellows from damage
Economical Choice
- High volume, standardized components
Single Coil Spring
- Helps prevent clogging
For use with a variety of mating rings
- O-Ring Mount
- Cup Mount
- DIN
Non-Fretting design
TS 166
Operating Limits:
Pressure: ≤1.0MPa
Speed: ≤10m/s
Temperature: -30ºC~+200ºC
Rotary Ring (Carbon/SiC/TC)
Stationary Ring (Ceramics/SiC/TC)
Secondary SeaI (/NBR/VITON/Encapsulated Ring)
Metal Parts (SUS304/SUS316)
Medium: Clean liquid, Sea water, waste water.
Design Features:
a. Single face, balanced.
b. Confirm to the DIN24960 and GB6556 standards.
The following is a few of the specialty pumps that we
have manufactured replacement seals for:
1. Roto Jet
2. Gorman Rupp
3. Viking
4. Seepex
5. Flygt
6. Johnson Albin
7. Bird Screens
8. Mission
9. Moyno
10. ACD Cryogenic
11. EMU
We would be happy to work with you on any of your unusual seal requirements
TS 166T
Trisun is a professional manufacturer of mechanical seals and OEM pump seals since 1998 and has branches in USA and Australia! Our seals are interchangeable with John Crane, Burgmann, AES, Flowserve, Fluiten, Roten, Sealtek etc.
TRISUN design advantages:
Competitors' inferior design and bad points:
- Offer less engagement
- Sharp stampings can damage the seal bellows
- Can be installed upside down at the seal manufacturer
- Competitor's tang and notch designs:
- Offer loose engagement
- Fewer points of contact with the seal outer shell
- May lead to broken tangs and seal bellows damage