Description
Morgan bearing ring type FI is mainly used on piston rods. It provides guiding and bearing surfaces between rod and housing and prevents metal to metal contact between them.
The FI consists of an extremely abrasion-resistant and low-friction POM-PTFE Bronze compound. It has a U-shaped cross-section and is split with an angled butt joint. It can be spirally compressed inwards for fitting into the rod housing where it springs back out into corresponding installation grooves. The bearing groove arrangement secures it against axial movement.
Fitting
The split bearing ring FI is compressed spirally and can be snapped easily into corresponding grooves in the cylinder head.
Fields of Application
The Morgan bearing rings can be used as single rings or multiple rings arranged adjacent to each other. The number of bearing rings depends on the expected side loads. The butt joints in adjacent bearings should be staggered
Due to its excellent dry running properties, the bearing ring FI can also be applied behind a rod seal opposite the pressure side. It can be used in all hydraulic cylinders, simple installation and optimum bearing
Material
Nylon PA, POM and PTFE.
Working condition
Speed: ≤3m/s
Working temperature: -55~225ºC(above 120ºC,Using PTFE)
Working Media:It can be used for hydraulic oil with a mineral oil base, for water-oil emulsions and for fire-resistant fluids as well as compressed air.
Design standard
Please to refer FI product series manufactured by Hunger when design.
Advantages
Easy installation, strong fixation
Combination of metal and plastic material prevents seizure and seizing
Favorable vibration damping characteristics(radial)
Morgan Seals has the biggest vulcanizing machine(4000T) and different kinds of seal moulds. So for the non standard guide rings, please do not hesitate to contact with us. The following is the the picture of our production line and warehouse:
Our services:
Guangzhou Morgan Seals Co., Ltd the expert in sealing solution field who combines the rich seals research and production experience of her parent firm with the advanced technology and administration of Morgan, Worcester. Morgan Seals Research and Development ability is based on her parent firm who has won awards as scientific research achievements for more than 1000 projects and over 200 of them won scientific and technological progress prizes of municipal, provincial, ministerial and national levels. At the same time, it also has one National Certified Laboratory, one National Engineering Research Centers and three Industry Level Inspection Centers.
Morgan bearing ring type FI is mainly used on piston rods. It provides guiding and bearing surfaces between rod and housing and prevents metal to metal contact between them.
The FI consists of an extremely abrasion-resistant and low-friction POM-PTFE Bronze compound. It has a U-shaped cross-section and is split with an angled butt joint. It can be spirally compressed inwards for fitting into the rod housing where it springs back out into corresponding installation grooves. The bearing groove arrangement secures it against axial movement.
Fitting
The split bearing ring FI is compressed spirally and can be snapped easily into corresponding grooves in the cylinder head.
Fields of Application
The Morgan bearing rings can be used as single rings or multiple rings arranged adjacent to each other. The number of bearing rings depends on the expected side loads. The butt joints in adjacent bearings should be staggered
Due to its excellent dry running properties, the bearing ring FI can also be applied behind a rod seal opposite the pressure side. It can be used in all hydraulic cylinders, simple installation and optimum bearing
Material
Nylon PA, POM and PTFE.
Working condition
Speed: ≤3m/s
Working temperature: -55~225ºC(above 120ºC,Using PTFE)
Working Media:It can be used for hydraulic oil with a mineral oil base, for water-oil emulsions and for fire-resistant fluids as well as compressed air.
Design standard
Please to refer FI product series manufactured by Hunger when design.
Advantages
Easy installation, strong fixation
Combination of metal and plastic material prevents seizure and seizing
Favorable vibration damping characteristics(radial)
Morgan Seals has the biggest vulcanizing machine(4000T) and different kinds of seal moulds. So for the non standard guide rings, please do not hesitate to contact with us. The following is the the picture of our production line and warehouse:
Our services:
Guangzhou Morgan Seals Co., Ltd the expert in sealing solution field who combines the rich seals research and production experience of her parent firm with the advanced technology and administration of Morgan, Worcester. Morgan Seals Research and Development ability is based on her parent firm who has won awards as scientific research achievements for more than 1000 projects and over 200 of them won scientific and technological progress prizes of municipal, provincial, ministerial and national levels. At the same time, it also has one National Certified Laboratory, one National Engineering Research Centers and three Industry Level Inspection Centers.