Description
The UHS profile hydraulic polyurethane seals can be used both as a piston and rod seal due to their geometry. They are, so to speak, a universal solution without a specific design of the sealing lip.
Technical data
Working pressure:≤40MPa;
Working temperature:-30~+100ºC;
Working medium:Hydraulic oil (mineral oil based);
Reciprocation speed:≤0.5m/s
Advantages
- Good pressure-adapted sealing effect
- Unaffected by high loads and deflections of the piston rod
- High resistance against extrusion.
- Lower friction in the low-pressure range compared with double-lipped versions.
- Excellent in static and dynamic sealing
-Low requirements on groove roughness
- Easy installation.
Applications
Light and medium load hydraulic reciprocated sealing system. Widely used at industries such as mobile machinery, light machinery, agricultural machinery, injection molding machinery, forklifts, cranes, automobiles, forestry machinery and mining machinery, etc. Favorable mechanical characteristics even under tough working conditions.
Materials
The USH seal ring can be made of NBR, FKM, PU according to the application.
Polyurethane is a material that has the elastic properties of rubber. The proportion in its composition (diisocyanate, polyol, chain extender) is determined by its properties. This material is characterized by a strong mechanical resistance, good wear resistance, high elastic modulus, good flexibility and a very good ozone and oxidation resistance.
Typical Cases:
About Morgan
Established by Guangzhou Mechanical Engineering Research Institute Co., Ltd. (51% share, hereinafter to be referred as GMERI) and Morgan Construction Co., Worcester, MA, U. S. A. (49%, hereinafter to be referred as Morgan, Worcester) in 2006, Guangzhou Morgan seals Company Ltd. Is a professional rotary shaft oil seal manufacturer. Combined the rich seals research and production experience of GMERI with the advanced technology and administration of Morgan, Worcester, the joint venture is renowned for its modern production lines, persisting research & development, strict quality control, quality sales and after-sales service. Now she has gained a good name from her customer all over the world, such as Siemens Primetals, Baosteel, SMS siemag and so on.
Morgan Seals Research and Development ability is based on her parent firm who has won awards as scientific research achievements for more than 1000 projects and over 200 of them won scientific and technological progress prizes of municipal, provincial, ministerial and national levels. At the same time, it also has one National Certified Laboratory, one National Engineering Research Centers and three Industry Level Inspection Centers.
The UHS profile hydraulic polyurethane seals can be used both as a piston and rod seal due to their geometry. They are, so to speak, a universal solution without a specific design of the sealing lip.
Technical data
Working pressure:≤40MPa;
Working temperature:-30~+100ºC;
Working medium:Hydraulic oil (mineral oil based);
Reciprocation speed:≤0.5m/s
Advantages
- Good pressure-adapted sealing effect
- Unaffected by high loads and deflections of the piston rod
- High resistance against extrusion.
- Lower friction in the low-pressure range compared with double-lipped versions.
- Excellent in static and dynamic sealing
-Low requirements on groove roughness
- Easy installation.
Applications
Light and medium load hydraulic reciprocated sealing system. Widely used at industries such as mobile machinery, light machinery, agricultural machinery, injection molding machinery, forklifts, cranes, automobiles, forestry machinery and mining machinery, etc. Favorable mechanical characteristics even under tough working conditions.
Materials
The USH seal ring can be made of NBR, FKM, PU according to the application.
Polyurethane is a material that has the elastic properties of rubber. The proportion in its composition (diisocyanate, polyol, chain extender) is determined by its properties. This material is characterized by a strong mechanical resistance, good wear resistance, high elastic modulus, good flexibility and a very good ozone and oxidation resistance.
| Chemical resistance | Pure aliphatic hydrocarbons (propane, butane) Mineral oils and greases Silicone oils and greases Water up to +50°C |
| Compatibility issue | Ketones, esters, ethers, alcohols and glycols Hot water, steam, alkalis, amines and acids |
| Temperature range | -30°C/+90°C -30°C / +110°C with our PUHT (short term peak at 150°C) |
Typical Cases:
The largest PU plastic seal morgan produced is the sealing ring for Three Gorges Hydroelectric Power Station water-turbine generator(OD is 13000mm).
Guangzhou Morgan Seals has the biggest vulcanizing machine(4000T) and different kinds of seal moulds. So for the non-standard hydraulic seals, please feel free to contact with us. The following is the the picture Morgan Production Line and Warehouse:About Morgan
Established by Guangzhou Mechanical Engineering Research Institute Co., Ltd. (51% share, hereinafter to be referred as GMERI) and Morgan Construction Co., Worcester, MA, U. S. A. (49%, hereinafter to be referred as Morgan, Worcester) in 2006, Guangzhou Morgan seals Company Ltd. Is a professional rotary shaft oil seal manufacturer. Combined the rich seals research and production experience of GMERI with the advanced technology and administration of Morgan, Worcester, the joint venture is renowned for its modern production lines, persisting research & development, strict quality control, quality sales and after-sales service. Now she has gained a good name from her customer all over the world, such as Siemens Primetals, Baosteel, SMS siemag and so on.
Morgan Seals Research and Development ability is based on her parent firm who has won awards as scientific research achievements for more than 1000 projects and over 200 of them won scientific and technological progress prizes of municipal, provincial, ministerial and national levels. At the same time, it also has one National Certified Laboratory, one National Engineering Research Centers and three Industry Level Inspection Centers.