Wed September 15, 2021 - National Edition #19 Ruksana Hussain - CEG Correspondent

When winter weather conditions come around, it's snowplows to the rescue as highways, roads and streets are cleared of ice and snow, and maintained for everyday use. And though that's the only season we might see this equipment in action, it takes regular care and repairs to ensure all that machinery that's taken a beating from hours of operation will still perform as it should when the next snow season rolls around. To ensure your snowplows are maintained in good condition, here are some important reminders from snow and ice equipment manufacturers.

Matt Morrison, director of sales and marketing at Minnesota-based Hiniker Company, designer and manufacturer of snow and ice removal equipment, shares the following as part of a Pre-Season Snowplow Maintenance Checklist:

Starting from inspecting all hardware, check all bolts, runners, welds, trip springs and fasteners on the plow and the mount for anything that may be cracked, missing or loose. As all these parts are prone to corrosion, be sure to clean and replace as needed.

Tighten everything so the plow stays intact through the next few months of activity and performs as it should. As with all equipment, many moving parts enable the smooth functioning of the snowplow. Lubricate all sliders, pins, exposed cylinders, etc. with oil or grease, especially if the machine has been in storage for a long period of time, to reduce wear and tear.

Address electric components like plugs and connections and battery terminals with dielectric grease to protect from corrosion and dirt. The smaller parts can be easily missed but these are the components that need to be in excellent shape to ensure your snowplow functions its best when those blizzards and snowstorms arrive.

When it comes to the snowplow's hydraulic systems, look for splits, cracks or leaks and other signs of damage on hoses and fittings as these affect plow functions. Considering this is the heart of the equipment and affects the moldboard. Troubleshooting ahead of time is crucial. Change the hydraulic fluid per specifications from manufacturer. Do not mix different types of fluid and remember that too much fluid is as much a problem as too little.

Ohio-based Meyer Products, manufacturer of high-performance snow and ice control equipment and management solutions, also offers a handy pre-season plow maintenance checklist (go.pardot.com/l/844753/2020-02-13/mdt4zx) that covers the basics — from checking springs, nuts, bolts and pins for wear and tear to inspecting hoses, couplers and rams for leaks or rust — to additional pointers such as only using manufacturer-approved fluid when replacing hydraulic fluid and cleaning the battery and battery terminals.

Keeping an eye on the condition of the cutting edge and plow shoe is equally important. When properly cared for, they maintain the structural integrity of the equipment. Their longevity is dependent on a few different factors, including the make and material; the surfaces on which the snowplow is used; and the frequency of use. Ensure the cutting edge is properly aligned to reduce wear and tear and poor performance.

Replace plow shoes as needed based on the manufacturer's instructions. And if the powder coating on the plow displays any rust, then a quick touch up might be necessary. Any chipped paint or exposed metal must be touched up right away to ensure the plow doesn't sustain further damage during snow season. If the plow frame is exposed or there is rubbing on the moldboard, then you've waited too long to save those parts.

While carrying an emergency kit for personal safety is always recommended, also consider maintaining an emergency kit that will be helpful in case of any untoward incidents or quick fixes while on the job. Include hydraulic fluid, hoses, solenoids, fuses, springs, safety lights, tow straps and ice melt, sand or kitty litter for unexpected icy conditions.

Finally, how you store a snowplow when it is not being used also can play a part in how well it functions when you do put it to use. Plow blades must be cleaned and inspected before storing in a dry place indoors to protect from the elements when not in use. If storage outdoors is the only option, then place the snowplow at an elevated level on a raised platform or pallet to avoid direct contact with the ground surface. Protect electrical connections, grease moving parts and remove any rust. Release the tension on the trip return springs as they don't need to be held as tightly in place as when the snowplow was in use.

With these checklist items, you should be well on your way to maintaining those snowplow blades so they last longer no matter the work they perform. Always remember to check on resources available from the manufacturer on maintaining parts and accessories and when in doubt, call the dealer or sales rep for guidance. A little caution ahead will see you avoid any troubles through a long and busy winter. CEG

Kansas City's Buck O'Neil Bridge Replacement

S.T. Wooten Makes Progress On I-95 Project

Manitowoc Company Withdraws From ConExpo

North American Equipment Dealers Association Completes Merger

JME Companies to Liquidate Heavy Truck, Equipment Repair Business

Bomag Americas Remembers Long-Time Team Member Bert DeJong

Compass Auctions Has Strategy for Increasing Heavy Equipment Bids

Linder Industrial Opens New Ft. Myers, Fla., Facility

Construction Equipment Guide 470 Maryland Drive Fort Washington, PA 19034 800-523-2200

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2022, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Read our privacy policy here.